Appliance EnergyCost Calculator

How to find your electricity price per kWh

The price to enter in an energy cost calculator is the amount you pay for each kilowatt-hour (kWh), usually called the unit rate or energy charge. Leave out fixed daily or monthly charges when you cost one appliance, and convert cents or pence to dollars, pounds or euros first.

Published

Where to find it

Look on your latest bill, your online account or your tariff document for a figure per kWh. It goes by different names depending on the country and supplier: unit rate, energy charge, usage charge, price per kWh or rate per kWh. Ofgem, the energy regulator in Great Britain, calls it the unit rate and explains that your tariff sets it.

If your bill shows only totals, the tariff document or the supplier's price list for your plan will give the rate. Use the current one: if the price changed recently, an old bill shows the old rate.

Converting cents and pence

Prices per kWh are often shown in cents or pence. The calculator expects the main currency unit, so divide by 100.

Converting a price per kWh (illustrative prices)
On the billCalculationEnter
25 cents per kWh25 ÷ 1000.25 (dollars)
18 pence per kWh18 ÷ 1000.18 (pounds)
30 euro cents per kWh30 ÷ 1000.30 (euros)

Entering 25 instead of 0.25 makes every result 100 times too high. The calculators show a check when a price looks as if it was entered in cents.

Fixed charges: leave them out for one appliance

Many tariffs also have a fixed charge: a standing charge, daily supply charge or monthly service charge. Ofgem explains that the standing charge is paid every day even if you use no energy, and the California Public Utilities Commission describes a fixed charge as one that recovers fixed costs. It is the same whether you run your washing machine once a month or every day, so it is not part of what that appliance costs to run.

With an illustrative price of $0.20 per kWh and a fixed charge of $15 a month, an appliance that uses 2 kWh costs 2 × 0.20 = $0.40 to run. The $15 is paid either way. Adding it to each appliance would count it several times over.

When the bill lists several charges per kWh

Some bills split the price per kWh into parts, for example a supply or generation charge and a delivery or network charge, sometimes from different companies. The European Commission describes EU bills as made up of supply, network charges, and taxes and levies, and the U.S. EIA notes that utility rates are the prices of itemised services. If each part is charged per kWh, add them together:

Adding the per-kWh parts of a bill (illustrative)
ChargePer kWh
Supply$0.12
Delivery$0.05
Network$0.02
Per-kWh surcharge$0.01
Price to enter$0.20

0.12 + 0.05 + 0.02 + 0.01 = $0.20 per kWh. Only add parts that are charged per kWh, and do not add a part twice if your supplier also shows an all-in unit rate.

Taxes

Taxes can be included in the unit rate, charged per kWh, or added as a percentage of the bill. If the unit rate already includes them, use it as it is. If a tax is a percentage of the energy charges, multiply the rate by it: an illustrative $0.20 with a 5% tax becomes 0.20 × 1.05 = $0.21 per kWh. If the tax also applies to the fixed charge, only the part on the energy charges belongs in an appliance estimate.

Prices that change with the amount you use

Some tariffs charge a higher price per kWh once your use in a billing period passes a set amount; the California Public Utilities Commission, for example, refers to residential tiered rates and prices above a “baseline” amount of use. Suppose, purely as an illustration, the first 100 kWh cost $0.15 each and the next 200 kWh cost $0.20. If a household has used 90 kWh and an appliance adds 20 kWh, the first 10 kWh are at $0.15 and the other 10 at $0.20: 10 × 0.15 + 10 × 0.20 = 1.50 + 2.00 = $3.50. Using either price for all 20 kWh would give $3.00 or $4.00.

For an appliance you run every month, the useful price is usually the one your household normally reaches, because that is the price of each extra kWh. Your tariff document shows the thresholds.

Prices that change with the time of day

On a time-of-use tariff the price depends on when you use electricity: a higher peak rate and a lower off-peak rate, sometimes with a third, middle rate. Ofgem gives Economy 7 as an example, and the California Public Utilities Commission describes time-of-use plans as based on when and how much energy is used.

If an appliance runs entirely in one period, use that period's price. If it runs in both, split the energy. With an illustrative 1 kWh at a peak price of $0.30 and 2 kWh off-peak at $0.10, the cost is 1 × 0.30 + 2 × 0.10 = 0.30 + 0.20 = $0.50 for 3 kWh, an average of 0.50 ÷ 3 = about $0.167 per kWh for that pattern of use. The kWh calculator does this split for you: tick the two-price option, enter both prices and the share of the energy used at the second price. In the example that share is 2 ÷ 3, about 66.7%.

Working out an average price from your bill

If the rate is hard to find, you can work out an average from the bill: divide the energy charges by the kWh used. Do not divide the whole bill by the kWh, because that spreads the fixed charges over every kWh.

Two averages from the same illustrative bill
CalculationResult
Energy charges $80.00 ÷ 400 kWh$0.20 per kWh
Whole bill $100.00 ÷ 400 kWh$0.25 per kWh

In this illustration the bill is $80.00 of energy charges, a $15.00 fixed charge and $5.00 of other items. The first figure, $0.20, is the one to use for an appliance. The second, $0.25, includes $20.00 that would be paid anyway. An average can still mislead if the bill includes tiers, time-of-use prices, credits or corrections from earlier periods.

Common mistakes

Mistakes that distort an appliance estimate
MistakeEffectInstead
Entering 25 for 25 centsResult 100 times too highEnter 0.25
Using the whole bill ÷ kWhIncludes fixed chargesUse the energy charges only
Leaving out a per-kWh delivery chargeResult too lowAdd every per-kWh part
Using a rate without tax when the bill adds it per kWhResult too lowInclude the per-kWh tax
Using the peak price for off-peak useResult too highMatch the price to the time
Using last year's rateOut of dateCheck the latest bill or tariff

With the right price, the rest is arithmetic: how to calculate appliance electricity costs shows the steps, and why your bill differs from appliance estimates explains what else appears on a bill.

Related guides

Sources

These sources support specific statements on this page. They do not review or endorse this calculator or its results. Last reviewed .

How this guide was written

The first draft was written with the help of an AI writing assistant. It was then edited, every calculation was worked through again, and each factual statement was checked against the sources listed above; statements that could not be checked were removed. Example figures are illustrations chosen to show the arithmetic, not measurements or typical values. See the methodology for how the calculators work.