How to compare the running costs of different appliances
Compare the energy each appliance uses over the same period, usually a year, not its wattage. Convert every appliance to kWh per year with the method that suits it, price them all at the same rate, and only then rank them.
Published
Why wattage alone misleads
Watts measure how fast an appliance uses electricity at a moment; kilowatt-hours measure how much it uses over time. Cost follows the kWh. Compare two made-up appliances: one draws 2,000 W for half an hour a day, the other 100 W for 12 hours.
| Power and use per day | Energy per day | Energy per year | |
|---|---|---|---|
| Appliance A | 2,000 W0.5 hours | 1 kWh | 365 kWh |
| Appliance B | 100 W12 hours | 1.2 kWh | 438 kWh |
2,000 × 0.5 ÷ 1,000 = 1 kWh a day and 100 × 12 ÷ 1,000 = 1.2 kWh a day, so over a year 1 × 365 = 365 kWh against 1.2 × 365 = 438 kWh. The appliance with twenty times the wattage uses less energy, because it runs for a fraction of the time.
Put every appliance on a yearly basis
Appliances work in different ways, so each needs the method that fits it. All of them can end in the same unit: kWh per year. The calculator uses a 365-day year, so a week is a 365 ÷ 7 share of it.
- Appliances that run for a time, such as heaters, fans, lights and computers: kWh per year = watts ÷ 1,000 × hours per day × days per week × 365 ÷ 7. If the appliance cycles and you know roughly how much of the time it draws full power, use that share as the effective power.
- Appliances that run in cycles, such as washing machines, dishwashers and dryers: kWh per year = kWh per cycle × cycles per week × 365 ÷ 7. Use the figure for the program you normally use; EU washing machine labels give it per 100 cycles of the eco 40-60 program.
- Appliances with a yearly label figure, such as fridges and freezers: use the kWh per year as it is, rather than estimating from watts.
- Standby: kWh per year = standby watts ÷ 1,000 × hours per day × 365. The U.S. Department of Energy defines standby power as the lowest power a device draws while plugged in.
A worked comparison
The four appliances below use one method each, priced at an illustrative $0.20 per kWh. Every input is an example chosen to show the arithmetic, not a typical value.
| Appliance and inputs | Method | Energy per year | Cost per year |
|---|---|---|---|
| Heater: 1,500 W, 1 hour a day, 5 days a week | Power and hours | 391.07 kWh | $78.21 |
| Washing machine: 0.8 kWh per cycle, 4 cycles a week | Energy per cycle | 166.86 kWh | $33.37 |
| Fridge: label figure 450 kWh a year | Energy per year | 450 kWh | $90.00 |
| Device on standby: 2 W, 24 hours a day | Standby | 17.52 kWh | $3.50 |
- Heater: 1,500 ÷ 1,000 × 1 × 5 = 7.5 kWh a week; 7.5 × 365 ÷ 7 = 391.07 kWh a year; × 0.20 = $78.21.
- Washing machine: 0.8 × 4 = 3.2 kWh a week; 3.2 × 365 ÷ 7 = 166.86 kWh; × 0.20 = $33.37.
- Fridge: 450 × 0.20 = $90.00.
- Standby: 2 ÷ 1,000 × 24 × 365 = 17.52 kWh; × 0.20 = $3.50.
With these inputs the fridge costs the most, then the heater. Change the heater's hours or the number of washes and the order can change, which is the point: the ranking depends on how you use each appliance, not on which looks most powerful. The heater figure also assumes full power for every hour; with a thermostat it could be lower.
One appliance, two tariffs
The same kWh can cost different amounts. On a time-of-use tariff, such as the Economy 7 tariffs Ofgem describes, a kWh off-peak costs less than one at peak times. Take the illustrative fridge above, 450 kWh a year, and illustrative prices of $0.20 flat, or $0.30 peak and $0.15 off-peak:
| Tariff | Working | Cost per year |
|---|---|---|
| Flat $0.20 | 450 × 0.20 | $90.00 |
| Time of use, 150 kWh peak and 300 kWh off-peak | 150 × 0.30 + 300 × 0.15 | $90.00 |
| Time of use, 300 kWh peak and 150 kWh off-peak | 300 × 0.30 + 150 × 0.15 | $112.50 |
150 × 0.30 = $45.00 plus 300 × 0.15 = $45.00 gives $90.00, the same as the flat price in this example; with the split reversed, 300 × 0.30 = $90.00 plus 150 × 0.15 = $22.50 gives $112.50. Whether a time-of-use tariff helps depends on when you use electricity, not only on how much. The kWh calculator has a two-price option for this: enter the energy, both prices and the share used at the second price. The guide to electricity prices explains how to read your tariff.
Comparisons that mislead
- Rated watts against a measured average. A rating describes set conditions; a measured average over a day includes all the cycling. Compare like with like, ideally measured kWh over a representative period for both. The Department of Energy notes that power that fluctuates should be measured over a period of time.
- Per cycle against per hour. 1 kWh per cycle and 1 kWh per hour are different things. Convert both to kWh per year with your real number of cycles and hours.
- Different periods. A daily figure for one appliance and a monthly figure for another cannot be ranked. Use the same period for all.
- Different prices. Price every appliance at the same rate unless you are deliberately comparing tariffs.
- Appliances that do different jobs. A fridge keeps food cold, a heater keeps you warm. A running cost tells you where your electricity goes, not which appliance is “worth” more. When you compare two models of the same appliance, check that they have similar capacity and are used the same way.
Using the comparison list
- Open the appliance cost calculator and enter your price per kWh once; it is used for every appliance.
- Enter each appliance with the method that suits it: power and hours, energy per cycle, energy per year, or in use plus standby.
- Choose an appliance type, then add it to the comparison.
- Open the energy dashboard to see each appliance's yearly cost, yearly energy and share of the total, the totals per day, week, month and year, and which appliance costs the most. You can download the list as a CSV file.
The list is saved only in your browser. To decide whether replacing an appliance is worth it, is a more efficient appliance worth it? takes the comparison a step further.
Related guides
- How to calculate electricity costs for household appliances
- Is a more efficient appliance worth it? Working out savings and payback
- How to find your electricity price per kWh
- All guides
Sources
These sources support specific statements on this page. They do not review or endorse this calculator or its results. Last reviewed .
- U.S. Energy Information Administration (EIA): Measuring electricity. Defines the watt as power, the kilowatt as 1,000 watts and the kilowatthour as energy over time.
- U.S. Department of Energy (FEMP): Measuring standby power. Defines standby power as the lowest power consumption while plugged in, and explains that fluctuating power should be measured over a period of time to find the average.
- Ofgem: How your electricity or gas bill is calculated. Describes tariffs with a cheaper off-peak rate and a more expensive peak rate, such as Economy 7.
- European Commission: Washing machines. EU washing machine labels give the energy per 100 cycles of the eco 40-60 program.
How this guide was written
The first draft was written with the help of an AI writing assistant. It was then edited, every calculation was worked through again, and each factual statement was checked against the sources listed above; statements that could not be checked were removed. Example figures are illustrations chosen to show the arithmetic, not measurements or typical values. See the methodology for how the calculators work.