How to calculate electricity costs for household appliances
Multiply the energy an appliance uses, in kilowatt-hours (kWh), by the price you pay for each kWh. The energy comes from the appliance's power and running time, from a figure per cycle, or from the yearly figure on its energy label.
Published
The two formulas
Every running-cost estimate comes down to two steps. First work out the energy, then put a price on it:
- Energy (kWh) = power in watts × hours of use ÷ 1,000
- Cost = energy in kWh × your price per kWh
For example, an appliance drawing 800 watts for 3 hours uses 800 × 3 ÷ 1,000 = 2.4 kWh. At an illustrative price of $0.20 per kWh, that energy costs 2.4 × 0.20 = $0.48. The rest of this guide explains where each of those numbers comes from, and what to do when an appliance does not draw a steady amount of power.
Watts, kilowatts and kilowatt-hours
A watt (W) measures power: how fast an appliance is using electricity at a given moment. A kilowatt (kW) is 1,000 watts, so 1,500 W is the same as 1.5 kW.
A kilowatt-hour (kWh) measures energy: the amount used over time. One kWh is what something drawing 1,000 watts uses in one hour, and it is the unit your electricity is sold in. The difference matters because power alone tells you nothing about cost. A 2,000 W heater used for 15 minutes uses 2,000 × 0.25 ÷ 1,000 = 0.5 kWh, while a 50 W device left on for 24 hours uses 50 × 24 ÷ 1,000 = 1.2 kWh, more than twice as much. The kWh calculator converts between watts, hours and kWh if you want to check a figure.
Step 1: find the energy the appliance uses
There are three common starting points, and the right one depends on how the appliance works and what information you have.
From power and running time
This suits appliances that draw roughly the same power whenever they are on, such as a fan, a lamp or a heater set to full power. Multiply the power by the hours it runs. For a weekly routine, hours per week = hours per day × days per week; a fan used 6 hours a day on 5 days runs 6 × 5 = 30 hours a week.
Convert minutes to hours by dividing by 60 before you use the formula. A 1,200 W appliance used for 45 minutes runs for 45 ÷ 60 = 0.75 hours and uses 1,200 × 0.75 ÷ 1,000 = 0.9 kWh.
Be careful with appliances that switch themselves on and off. A refrigerator is plugged in all day, but its compressor does not run all day, so its rated power × 24 hours overstates what it uses. The guide to rated power and actual electricity use explains why, and how to correct for it.
From a figure per cycle
Washing machines, dishwashers and tumble dryers use different amounts of power at different stages of a program, so a figure per cycle is more useful than a wattage. Multiply the kWh per cycle by the number of cycles. EU energy labels for washing machines give the energy per 100 cycles of the eco 40-60 program, so divide that number by 100 to get one cycle: a label showing 52 kWh per 100 cycles means 52 ÷ 100 = 0.52 kWh per cycle of that program. Hotter or longer programs can use more.
From a yearly figure
Fridges and freezers run day and night, and their labels give an annual figure instead: kWh per year on EU labels, and an estimated yearly electricity use on the U.S. EnergyGuide label. Divide by 365 for a day or by 12 for an average month. These are test results under standard conditions, so your appliance may use more or less at home. The guide to energy labels shows where each figure appears.
Step 2: find your price per kWh
The price you need is the one charged for each kWh, often called the unit rate or energy charge. It is on your bill or tariff. If it is shown in cents or pence, divide by 100: 18 cents per kWh is $0.18, 24.5 pence is £0.245 and 21 euro cents is €0.21.
Many tariffs also have a fixed daily or monthly charge, called a standing charge in Great Britain. You pay it even on a day when you use no electricity, so it does not change when you use one appliance more or less. Leave it out when you cost a single appliance. If your price changes with the time of day, or rises after a certain amount of use, see how to find your electricity price per kWh.
Worked examples: per day, month and year
The table uses one example of each method at an illustrative price of $0.20 per kWh. The wattage, the energy per cycle and the yearly label figure are example inputs chosen to show the arithmetic; they are not typical values for any appliance. As in the calculator, a year has 365 days and a month is a twelfth of a year.
| Example and method | Per day | Per month | Per year |
|---|---|---|---|
| 60 W device, 8 hours a day, every day (power × time) | 0.48 kWh$0.10 | 14.6 kWh$2.92 | 175.2 kWh$35.04 |
| 0.7 kWh per cycle, 5 cycles a week (per cycle) | 0.5 kWh$0.10 | 15.21 kWh$3.04 | 182.5 kWh$36.50 |
| Label figure of 300 kWh per year (yearly) | 0.82 kWh$0.16 | 25 kWh$5.00 | 300 kWh$60.00 |
How each row is worked out:
- 60 W device: 60 × 8 ÷ 1,000 = 0.48 kWh a day, and 0.48 × 0.20 = $0.096, about $0.10. A year is 0.48 × 365 = 175.2 kWh, costing 175.2 × 0.20 = $35.04; a month is 175.2 ÷ 12 = 14.6 kWh, costing $2.92.
- Per-cycle appliance: 0.7 × 5 = 3.5 kWh a week. A year is 3.5 × 365 ÷ 7 = 182.5 kWh, costing 182.5 × 0.20 = $36.50. A month is 182.5 ÷ 12 = 15.21 kWh, costing $3.04, and the daily average is 3.5 ÷ 7 = 0.5 kWh, costing $0.10.
- Label figure: 300 × 0.20 = $60.00 a year. A month is 300 ÷ 12 = 25 kWh, costing $5.00, and a day is 300 ÷ 365 = 0.82 kWh, costing about $0.16.
Only the final amounts are rounded to cents. If you round the kWh first, small differences build up over a year.
Estimated or measured?
An estimate from rated power or a label figure is quick and good for comparing appliances, but it describes standard conditions, not your home. A plug-in electricity monitor between the socket and the appliance records the kWh it actually uses. Run it over a realistic period, such as a full wash cycle or several days for a fridge, and divide the kWh by the time measured. A single reading of watts on the display is a snapshot, and for an appliance that cycles it can be far from the average.
Measuring is most useful for older appliances, for anything with a thermostat, and when an estimate looks wrong. How to measure real appliance electricity use explains the options, including meter readings for appliances that are wired in.
Using the appliance cost calculator
The appliance cost calculator on the home page offers the same three starting points, plus one that adds standby power. Choose the method that matches the figure you have:
- Power and hours for a wattage: enter the watts, hours of use per day and days of use per week. The effective power starts at 100%, meaning full rated power for every hour entered; lower it only if you know the appliance cycles off for part of that time.
- Energy per cycle for washing machines, dishwashers and dryers: enter the kWh per cycle and cycles per week.
- Energy per year for an annual label figure: enter the kWh per year.
- In use plus standby for devices that stay plugged in, such as a television: enter the power and hours in use, the standby watts and the hours plugged in per week. The standby power calculator handles standby on its own.
Then enter your price per kWh. The result shows the energy and cost per day, week, month and year, and you can add the appliance to a comparison list to see it beside others. The methodology sets out every formula and rounding rule the calculator uses.
What an estimate cannot tell you
An appliance estimate is not a prediction of your bill. Your bill covers every appliance in the home over a billing period that rarely matches a calendar month, and it can include fixed charges, taxes and prices that change with the time of day. Why your bill differs from appliance estimates explains how to compare the two.
Related guides
- How to find your electricity price per kWh
- Rated power vs actual electricity use: what's the difference?
- How to compare the running costs of different appliances
- All guides
Sources
These sources support specific statements on this page. They do not review or endorse this calculator or its results. Last reviewed .
- U.S. Energy Information Administration (EIA): Measuring electricity. Defines the watt, the kilowatt (1,000 watts) and the kilowatthour, and explains how electricity use is measured.
- Ofgem: Energy price cap and standing charges explained. Defines the unit rate, charged per kWh, and the standing charge, paid every day even if no energy is used.
- European Commission: Washing machines. EU washing machine labels give the weighted energy consumption per 100 cycles of the eco 40-60 program.
- European Commission: Fridges and freezers. EU fridge and freezer labels give the annual energy consumption in kWh.
- U.S. Department of Energy: Energy Saver Guide (2022, PDF). Describes the EnergyGuide label's estimated yearly electricity use and cost, and notes that the figures are averages and actual costs depend on how an appliance is used.
How this guide was written
The first draft was written with the help of an AI writing assistant. It was then edited, every calculation was worked through again, and each factual statement was checked against the sources listed above; statements that could not be checked were removed. Example figures are illustrations chosen to show the arithmetic, not measurements or typical values. See the methodology for how the calculators work.